Blog Archives

Dymo LabelWriter Wireless - Resetting the Printer to Factory Default Settings

4 CommentsSunday, 24 September 2017  |  Dymo Sales

Resetting the Printer to Factory Default Settings

An easy way to move the LabelWriter Wireless printer to a new network is to reset the printer to factory default settings. This reset will delete any custom settings you may have entered in the Web Configuration utility such as printer name, password, language, and so on.

To reset the printer to factory default settings

  1. Make sure the power is turned on. If you just pressed the power button, wait for about 30 seconds for the printer to fully start up.
  2. Using a pointed non-metal tool, press and hold the RESET button on the back of the printer for at least five seconds.
  3. After five seconds, release the RESET button to begin the printer reset.

After about 30 seconds, you will be able to connect the printer to a wireless network as described in Connecting the Printer to your Wireless Network.

If you are having problems with your Dymo Labelwriter Wireless printer please go to and contact Dymo Technical Support.

Neil Pardiwala
Friday, 16 February 2018  |  21:24

It is very easy to install, once you all the details about the WIFI.
I tested and it works good.

Ralph Concentineo
Friday, 25 September 2020  |  5:56


Friday, 25 September 2020  |  7:33

The LW450 is not a wireless labelwriter printer.