0
£0.00

Dymo Labelwriter Windows 8.1 driver & software

12 May 2014  |  Tech Support
19 Comments

Dymo release their latest drivers and software  (v.8.5.1) for the LabelWriter range

NEW IN THIS RELEASE

This release includes:

  • Support for Microsoft Windows 8.1
  • Support for Microsoft Office 2013
  • Support for QuickBooks 2013 and 2014
  • Support for Act! v16

SYSTEM REQUIREMENTS

Operating System Support

  • Windows XP SP2 or later (32-bit)
  • Windows Vista (32-bit or 64-bit)
  • Windows 7 (32-bit or 64-bit)
  • Windows 8 (32-bit or 64-bit)
  • Windows 8.1 (32-bit or 64-bit)

COMPATIBILITY

Printer Support

DYMO Label v.8 supports the following printer models:

  • LabelWriter 450
  • LabelWriter 450 Turbo
  • LabelWriter 450 Twin Turbo
  • LabelWriter 450 Duo
  • LabelWriter 4XL
  • LabelWriter SE450
  • LabelWriter 400
  • LabelWriter 400 Turbo
  • LabelWriter Duo
  • LabelWriter Twin Turbo
  • LabelWriter 310 (models 90966, 93029 & 93034 ONLY)
  • LabelWriter 315 (model 90975 ONLY)
  • LabelWriter 320 (models 90892, 93031 & 93036 ONLY)
  • LabelWriter 330 (model 90891 & 93037 USB ONLY)
  • LabelWriter 330 Turbo (models 90884, 93033 & 93038, USB ONLY)
  • LabelManager Wireless PnP
  • LabelManager 280
  • LabelManager 500TS
  • LabelManager PnP
  • LabelManager 420P
  • LabelManager PCII
  • LabelManager 450
  • LabelManager 450D
  • LabelPoint 350

LabelWriter 3xx series models not listed above, and earlier printer models, are NOT supported by Windows 7 or Windows 8.

 

To download the driver & software, and for more information, click on the DRIVERS tab on the LabelWriter 450 product page.

 

R. Martin
26 November 2014  |  18:31

I need drivers for label writer 315 model# (90894) to run on windows 8.1

Admin
26 November 2014  |  18:49

If the model is not listed above then it is not supported under Windows 8

William
12 December 2014  |  17:09

i need drivers for dymo labelwriter 320 i keep getting driver error

Admin
12 December 2014  |  17:13

Is it a supported model (see list above)?

William
12 December 2014  |  23:58

Its not listed. Model number is 90795 i run windows 8.1 i can run any os but prefer windows 8.1 and need it workink thanks

Admin
13 December 2014  |  9:14

If the model is not listed above then it is not supported under Windows 8. Or Windows 7.

Norman
27 April 2015  |  13:18

I have my unsupported 320 (90795) working fine on 8.1. Same technique should work for other unsupported DYMO models. The chipset used by DYMO in some models does not fully meet USB2 specs. Use a print server (cheap on AMAZON) to hide the chipset info from Windows and it does not know to not support it. Also makes printer available via Wi-Fi and sharable. Full messy process available on request.

Admin
27 April 2015  |  14:09

Normans solution can be found here:

LW320 with Windows 8 - Wifi Solution