Dymo LabelWriter Wireless - Connecting to a Wireless Network

3 Comments

Running the Quick Setup Wizard

The first time you connect to the LabelWriter Wireless printer, a Quick Setup wizard guides you through the connection process. You can re-run this Quick Setup wizard at any time from the menu to connect to a different network. You can also skip the Quick Setup wizard and configure the printer for a network.

Connecting to a Wireless Network

The Web Configuration utility allows you more options for connecting the printer to a wireless network, such as accessing a hidden network or a more advanced configuration.

The wireless security methods supported are:

  • Open
  • WEP
  • WPA/WPA2 - Personal Mixed
  • WPA2 - Personal
  • WPA/WPA2 - Enterprise Mixed
  • WPA2 - Enterprise

X.509 certificates in PEM and DER formats are supported. PFX certificates must be converted to PEM/DER.

The information in this section assumes that you have the network name, authentication, and other network details available. If you don’t have this information, contact your network system administrator.

To connect the printer to a visible wireless network

  1. Log in to the Web Configuration utility.
  2. From the menu, click Wireless connection.
  3. Click Connect next to the wireless network name you want to connect to. If your network is not listed, see the instructions below to add a network manually.
  4. Enter the required information and click Connect.

To manually configure a hidden wireless network

  1. Log in to the Web Configuration utility.
  2. From the menu, click Wireless connection.
  3. Click Add network.
  4. Enter the network details and click Connect.

If you are having problems with your Dymo Labelwriter Wireless printer please go to www.dymo.com and contact Dymo Technical Support.